![[ICO]](/icons/blank.gif){kind=icon}
![[PARENTDIR]](/icons/back.gif){kind=icon}
![[IMG]](/icons/image2.gif){kind=icon}
![[ ]](/icons/layout.gif){kind=icon}
![[ ]](/icons/a.gif){kind=icon}
![[ ]](/icons/unknown.gif){kind=icon}
![[DIR]](/icons/folder.gif){kind=icon}
| Name | Last modified | Size | Description |
|---|---|---|---|---|
| Parent Directory | - | ||
| mini.jpg | 2014-11-07 00:21 | 1.9M | |
| 1st_layer_adhesion.jpg | 2014-11-18 22:38 | 4.1M | |
| Lulzbot_LogoTM_4c-eps-converted-to.pdf | 2014-11-18 22:39 | 42K | |
| Lulzbot_LogoTM_4c.eps | 2014-11-18 22:39 | 650K | |
| SHA1SUM | 2014-11-18 22:39 | 1.9K | |
| TAZ_2.0_GLCD-controller.JPG | 2014-11-18 22:39 | 4.2M | |
| X-Y_axes_leveling_check.JPG | 2014-11-18 22:39 | 4.0M | |
| Z_end_stop_trigger.JPG | 2014-11-18 22:39 | 3.6M | |
| axes.JPG | 2014-11-18 22:40 | 838K | |
| bed_connectors.JPG | 2014-11-18 22:40 | 4.3M | |
| bed_connectors_strain_relief.JPG | 2014-11-18 22:40 | 3.3M | |
| bed_connectors_strain_relief_done.JPG | 2014-11-18 22:40 | 3.8M | |
| electronics_DC_connector.JPG | 2014-11-18 22:40 | 3.0M | |
| electronics_DC_connector_tight.JPG | 2014-11-18 22:41 | 3.8M | |
| electronics_case_rec.JPG | 2014-11-18 22:41 | 3.4M | |
| end_stop_switches.JPG | 2014-11-18 22:41 | 2.5M | |
| extruder_filament_ready.JPG | 2014-11-18 22:41 | 4.3M | |
| extruder_filament_slot.JPG | 2014-11-18 22:42 | 5.4M | |
| extruder_idler_release.JPG | 2014-11-18 22:42 | 4.7M | |
| filament_arm.JPG | 2014-11-18 22:42 | 2.3M | |
| filament_arm_loaded.JPG | 2014-11-18 22:42 | 1.8M | |
| filament_guide.JPG | 2014-11-18 22:42 | 1.8M | |
| filament_guide_direction.JPG | 2014-11-18 22:42 | 3.0M | |
| filament_guide_mount.JPG | 2014-11-18 22:42 | 2.9M | |
| filament_in_guide.JPG | 2014-11-18 22:43 | 4.3M | |
| frame_y_axis_connector.JPG | 2014-11-18 22:43 | 1.0M | |
| katz.jpg | 2014-11-18 22:43 | 68K | |
| nozzle_height.jpg | 2014-11-18 22:43 | 5.3M | |
| power_supply.JPG | 2014-11-18 22:43 | 3.4M | |
| printrun-labels.png | 2014-11-18 22:43 | 138K | |
| printrun.png | 2014-11-18 22:43 | 128K | |
| printrun_controls.png | 2014-11-18 22:43 | 80K | |
| printrun_viewer.png | 2014-11-18 22:43 | 12K | |
| slic3r.png | 2014-11-18 22:43 | 46K | |
| taz.jpg | 2014-11-18 22:43 | 1.1M | |
| tool_head_connectors.JPG | 2014-11-18 22:44 | 3.8M | |
| tool_head_placement.JPG | 2014-11-18 22:44 | 3.5M | |
| tool_head_screw.JPG | 2014-11-18 22:44 | 3.9M | |
| y_axis_bolt_remove.JPG | 2014-11-18 22:45 | 4.3M | |
| y_axis_bolt_tighten.JPG | 2014-11-18 22:45 | 3.1M | |
| y_axis_bolts.JPG | 2014-11-18 22:45 | 2.2M | |
| y_axis_connectors.JPG | 2014-11-18 22:45 | 2.1M | |
| y_axis_connectors_zip-tie.JPG | 2014-11-18 22:45 | 3.0M | |
| Layerheight.png | 2014-11-21 21:58 | 100K | |
| Support.JPG | 2014-11-21 21:58 | 6.2M | |
| expertmode/ | 2015-02-20 15:03 | - | |
| simple_mode/ | 2015-02-20 15:03 | - | |
| working_with_models/ | 2015-02-20 15:03 | - | |
| advanced/ | 2015-02-20 15:03 | - | |
| organising/ | 2015-02-20 15:03 | - | |
| configuration_wizard/ | 2015-02-20 15:03 | - | |
| GLCD/ | 2015-02-20 15:03 | - | |
| tuning/ | 2015-02-20 15:03 | - | |
| cura/ | 2015-02-20 15:03 | - | |