[general]
version = 2
name = poly flex_SU301C_2
definition = lulzbot_taz6_dual_v3

[metadata]
quality_type = high speed
setting_version = 1
type = quality_changes

[values]
adhesion_extruder_nr = 1
adhesion_type = brim
cool_fan_full_at_height = 1
default_material_print_temperature = 225
expand_skins_into_infill = True
layer_height = 0.25
line_width = 0.5
material_bed_temperature = 60
material_bed_temperature_layer_0 = 60
material_final_print_temperature = 195
material_flow = 100
material_initial_print_temperature = 195
material_print_temperature = 225
material_print_temperature_layer_0 = 225
material_soften_temperature = 160
material_standby_temperature = 165
prime_tower_enable = True
prime_tower_min_volume = 8
prime_tower_position_x = 240
prime_tower_position_y = 240
prime_tower_size = 15
prime_tower_wall_thickness = 7.5
skin_line_width = 0.6
speed_support = 20
support_enable = True
support_extruder_nr = 1
support_interface_enable = True
support_interface_height = 0.5
support_interface_pattern = lines
switch_extruder_retraction_amount = 10
switch_extruder_retraction_speeds = 15
top_layers = 4