page2
Safety Data Sheet
NinjaFlex 3D Printing Filament
2 of 5
FIRST AID MEASURES
INGESTION: Rinse mouth and then drink plenty of water. Do not induce vomiting. Never induce vomiting or give anything
by mouth if the victim is unconscious or having convulsions. Immediate medical attention required.
SKIN: Solid material is not expected to pose a hazard in normal use, however skin contact with hot molten
substance/product may cause thermal burns.
EYES: Fumes or vapors may cause slight irritation during fused deposition modeling process.
INHALATION: Not likely to result in irritation in solid form. Thermal decomposition may result in release of toxic airborne
contaminants. Remove exposed individual to fresh air and keep the person calm. Assist in breathing if necessary. Immediate
medical attention required
NOTES TO PHYSICIAN: No specific antidote. Use supportive care. Treatment based on physician’s judgment in response
to patient's reactions.
4.
FIRE FIGHTING MEASURES
AUTOIGNITION: >400°C
EXTINGUISHING MEDIA: water, foam, dry extinguishing media, carbon dioxide.
FIREFIGHTING HAZARDS: carbon monoxide, carbon dioxide, hydrogen cyanide, nitrogen oxides, isocyanate. The
substances/groups of substances mentioned can be released in case of fire.
FIRE-FIGHTING EQUIPMENT: Use self-contained breathing apparatus.
FUTHER INFORMATION: Dispose of fire debris and contaminated extinguishing water in accordance with official
regulations.
5.
ACCIDENTAL RELEASE MEASURES
Normal housekeeping or clean-up to avoid tripping hazard. Keep from entering sewers, lakes or streams. Industrial waste
incineration is the recommended method of disposal, to be performed in accordance with Federal, State and local
regulations.
6.
HANDLING AND STORAGE
HANDLING
GENERAL ADVICE: Provide suitable exhaust ventilation in the area surrounding the melt outlet of fused deposition
modeling printer.
SPECIAL PRECAUTIONS: Wear gloves when handling hot material.
STORAGE:
GENERAL ADVICE: Store in original containers at ambient environmental conditions. Segregate from foods and animal
feeds.
7.
EXPOSURE CONTROLS / PERSONAL PROTECTION
VENTILATION: During fused deposition modeling operations, use with ventilation adequate to reduce levels of air
contaminants below that which may cause personal injury or illness. Local exhaust ventilation that removes air contaminants
from the breathing zone is preferred. General, mechanical, or dilution ventilation may be suitable.
RESPIRATORY PROTECTION: Wear a NIOSH-certified (or equivalent) organic vapor respirator as needed.
SKIN PROTECTION: Wear gloves when handling hot materials.
EYE/FACE PROTECTION: Wear splash goggles to protect from hot molten substance/product.
GENERAL: Wear protective clothing to prevent contact during hot melt conditions. When using, do not eat, drink or smoke.
After use wash hands with soap and water.