Stock Minimum Size: 68.154 x 57.453 x 9.00

Tools Needed:
T1 1/2 in end mill
T8 1/4 in end mill
T10 2.35mm drill
T11 3mm drill
T6 chamfer 

Face top

Run back_plate_path1_profile_and_holes.nc

Flip

Face bottom so part is 8mm thick

Run back_plate_path2_back_holes.nc

Flip so part has chamfered holes face in front and is in "T" orientation

Run back_plate_path3_top_holes_and_profile.nc

Flip so part has chamfered holes facing away and is un an upside down "T" orientation

Run back_plate_path4_bottom_holes.nc