Index of /mini/Azalea/test_parts

[ICO]NameLast modifiedSizeDescription

[PARENTDIR]Parent Directory  -  
[   ]A20_base.fcstd2014-05-06 12:35 20K 
[   ]A20_base.fcstd12014-05-06 12:33 20K 
[   ]A20_base.gcode2014-05-06 12:34 320K 
[   ]A20_base.stl2014-05-06 12:33 72K 
[   ]Blower_mount_0.12014-05-15 12:43 31K 
[   ]ETM_Volume.fcstd2014-04-23 15:24 12K 
[   ]ETM_Volume.fcstd12014-04-23 14:41 12K 
[   ]Extruder_mount_ETM-BAMedit.STL2014-04-15 15:28 509K 
[   ]Extruder_mount_ETM-BAMedit.gcode2014-05-05 10:07 3.3M 
[   ]Extruder_mount_ETM_2.STL2014-04-11 10:42 502K 
[   ]Extruder_mount_ETM_2.gcode2014-05-05 12:30 3.1M 
[   ]Handle_bar-squishy.gcode2014-05-12 08:26 871K 
[   ]Handle_bar.STL2014-04-11 07:18 1.5M 
[   ]Handle_bar.gcode2014-05-27 10:52 1.2M 
[   ]LCD_back_cover.STL2014-05-09 13:01 198K 
[   ]LCD_back_cover.gcode2014-05-09 13:01 1.6M 
[   ]LCD_catch.STL2014-05-09 12:59 241K 
[   ]LCD_hinge.STL2014-05-09 12:59 60K 
[   ]LCD_hinge_dont_print.STL2014-05-15 12:23 60K 
[   ]LCD_hinge_dont_print.gcode2014-05-15 12:23 497K 
[   ]LCD_parts.gcode2014-05-09 13:00 2.2M 
[   ]LDC_mount_azalea.STL2014-05-09 13:02 221K 
[   ]LDC_mount_azalea.gcode2014-05-09 13:02 2.8M 
[   ]Spool_arm.STL2014-05-09 09:41 123K 
[   ]Spool_arms.gcode2014-05-09 09:43 6.2M 
[   ]Y_belt_mount_easy.STL2014-04-29 18:21 207K 
[   ]Y_belt_mount_easy_2x.gcode2014-05-08 12:56 2.4M 
[   ]Y_belt_mount_easy_ETM.gcode2014-04-30 13:28 810K 
[   ]Y_belt_mount_easy_test.gcode2014-04-18 11:16 1.5M 
[   ]Y_end_idler.STL2014-05-09 10:09 197K 
[   ]Y_end_idler.gcode2014-05-09 10:15 2.4M 
[   ]Y_end_idler_ETM.gcode2014-04-30 10:06 1.5M 
[   ]Y_rod_mount.STL2014-04-07 07:56 176K 
[   ]Y_rod_mount.gcode2014-04-07 07:56 1.2M 
[   ]bear_holdr_3xreg.gcode2014-05-08 07:11 8.8M 
[   ]bearing_belt.gcode2014-04-14 06:57 6.5M 
[   ]bearing_holder_8-reg.STL2014-05-08 07:11 99K 
[   ]bearing_holder_8.STL2014-04-10 07:13 99K 
[   ]bearing_holder_8_sp.STL2014-04-10 07:13 85K 
[   ]bearing_holder_8_sp.gcode2014-05-08 13:24 1.5M 
[   ]bearing_holders.gcode2014-04-10 07:15 3.3M 
[   ]bed-finger-0.12014-04-16 13:18 54K 
[   ]bed-finger-ETM-0.1.gcode2014-04-16 10:30 501K 
[   ]bed-finger-ETM-0.1.stl2014-04-16 10:28 69K 
[   ]bed_corner_ETM.stl2014-04-10 12:51 31K 
[   ]bed_corner_ETM_4.gcode2014-04-10 12:51 1.4M 
[   ]bed_corner_Easy_TAZ_Mini.fcstd2014-05-12 07:41 209K 
[   ]bed_corner_Easy_TAZ_Mini.fcstd12014-04-10 13:46 54K 
[   ]bed_corner_washerstyle_ETM-4x.gcode2014-05-09 07:39 1.4M 
[   ]bed_corner_washerstyle_ETM.gcode2014-05-27 15:33 1.0M 
[   ]bed_corner_washerstyle_ETM.stl2014-05-09 07:38 34K 
[   ]bed_finger-2.1_4x.gcode2014-04-22 13:59 768K 
[   ]belt_clamp_easy.STL2014-04-24 08:57 41K 
[   ]belt_clamp_easy_4x.gcode2014-04-24 08:57 832K 
[   ]belt_clamps_and_mounts.gcode2014-05-07 13:27 4.0M 
[   ]blower_mt_0.1.gcode2014-05-15 12:44 1.0M 
[   ]blower_mt_0.1.stl2014-05-15 12:44 47K 
[   ]extruder_body_E3D.fcstd2014-03-25 12:56 5.1M 
[   ]extruder_body_E3D.fcstd12014-03-25 12:15 5.0M 
[   ]extruder_body_E3D.gcode2014-03-25 12:23 2.9M 
[   ]extruder_body_E3D.stl2014-03-25 13:20 267K 
[   ]extruder_body_E3D_test-.50noz.gcode2014-04-02 13:05 2.0M 
[   ]extruder_body_E3D_test.gcode2014-03-25 13:29 3.3M 
[   ]extruder_body_E3D_test.stl2014-03-25 13:20 267K 
[   ]lcd_holder.fcstd2014-05-05 10:31 74K 
[   ]lcd_holder.fcstd12014-05-05 10:10 77K 
[   ]lcd_holder_2.fcstd2014-05-06 14:50 99K 
[   ]lcd_holder_2.fcstd12014-05-06 13:58 99K 
[   ]lcd_holder_2.gcode2014-05-06 14:00 1.3M 
[   ]lcd_holder_2.stl2014-05-06 13:59 57K 
[   ]lcd_stand.fcstd2014-05-05 13:21 12K 
[   ]lcd_stand.fcstd12014-05-05 10:19 12K 
[   ]lcd_stand.stl2014-05-05 10:19 25K 
[   ]lcd_stand_2.gcode2014-05-05 10:20 559K 
[   ]lower_z_both.gcode2014-05-09 07:03 7.7M 
[   ]lower_z_left.STL2014-05-09 07:02 293K 
[   ]lower_z_left.gcode2014-04-30 10:50 4.9M 
[   ]lower_z_right.STL2014-05-09 07:01 293K 
[   ]lower_z_right.gcode2014-04-30 07:12 4.9M 
[   ]motor_isolator.DXF2014-05-09 14:01 18K 
[   ]motor_isolator.PDF2014-05-09 14:24 87K 
[   ]octopus_v18_yeoldebrian.gcode2014-04-25 15:08 835K 
[   ]octopus_v18_yeoldebrian_2.gcode2014-04-28 07:32 649K 
[   ]single_bearing_holder_8mm.fcstd2014-04-03 09:33 33K 
[   ]single_bearing_holder_8mm.fcstd12014-04-03 09:02 28K 
[   ]single_bearing_holder_8mm.gcode2014-04-03 09:03 1.1M 
[   ]single_bearing_holder_8mm.stl2014-04-03 09:02 55K 
[   ]single_bearing_holder_8mm_2-switch'd.stl2014-05-08 07:10 55K 
[   ]single_bearing_holder_8mm_2.fcstd2014-04-23 07:02 34K 
[   ]single_bearing_holder_8mm_2.gcode2014-04-23 07:04 2.6M 
[   ]single_bearing_holder_8mm_2.stl2014-04-23 07:03 55K 
[   ]single_bearing_holder_8mm_2_050.gcode2014-05-06 14:46 727K 
[   ]single_bearing_holder_8mm_4.gcode2014-04-07 12:48 4.5M 
[   ]spool_arm_azalea.STL2014-05-09 09:40 70K 
[   ]square_test.gcode2014-04-28 11:51 448K 
[   ]square_test_2.gcode2014-04-29 07:06 6.0M 
[   ]square_test_3.gcode2014-04-29 11:53 742K 
[   ]stepper_damper-2mm-5x.gcode2014-04-29 14:25 1.5M 
[   ]stepper_damper-2mm.fcstd2014-04-29 14:23 14K 
[   ]stepper_damper-2mm.stl2014-04-29 14:23 49K 
[   ]strain_relief_both_.35noz.gcode2014-05-08 08:07 2.6M 
[   ]strain_reliefs.gcode2014-04-22 11:49 2.0M 
[   ]temp_switch_mount.fcstd2014-04-25 12:04 20K 
[   ]temp_switch_mount.fcstd12014-04-25 12:03 17K 
[   ]temp_switch_mount.gcode2014-04-25 12:05 286K 
[   ]temp_switch_mount.stl2014-04-25 12:04 19K 
[   ]upper_z_left.STL2014-04-04 11:39 192K 
[   ]upper_z_left_rotated-.5noz.gcode2014-05-22 14:38 1.3M 
[   ]upper_z_left_rotated.STL2014-04-30 07:10 192K 
[   ]upper_z_left_rotd.STL2014-05-01 09:25 192K 
[   ]upper_z_left_rotd.gcode2014-05-01 09:26 1.9M 
[   ]upper_z_right.STL2014-04-07 07:26 192K 
[   ]upper_z_right.gcode2014-04-07 07:28 1.5M 
[   ]wiper_mount_v0.3.fcstd2014-09-09 11:51 76K 
[   ]wiper_mount_v0.3.fcstd12014-09-08 08:47 75K 
[   ]wiper_mount_v0.42014-08-29 10:00 75K 
[   ]wiper_mount_v0.4.fcstd2014-09-09 12:04 75K 
[   ]wiper_mt_0.12014-05-20 08:39 147K 
[   ]wiper_mt_0.1.gcode2014-05-19 07:29 1.0M 
[   ]wiper_mt_0.1.stl2014-05-19 07:24 206K 
[   ]wiper_mt_0.2.gcode2014-05-20 08:41 718K 
[   ]wiper_mt_0.2.stl2014-05-20 08:39 61K 
[   ]wiper_mt_0.3.gcode2014-08-15 10:05 1.1M 
[   ]wiper_mt_0.3.stl2014-06-30 08:45 58K 
[   ]wiper_mt_0.4.gcode2014-08-29 10:01 347K 
[   ]wiper_mt_0.4.stl2014-09-09 12:05 59K 
[   ]wiper_mt_0.112014-05-19 07:23 111K 
[   ]x_end_idler_ETM.STL2014-05-09 10:08 480K 
[   ]x_end_idler_ETM.gcode2014-05-09 10:10 9.1M 
[   ]x_end_idler_ETM_0.5noz.gcode2014-05-22 14:31 6.9M 
[   ]x_end_motor_ETM-.5noz.gcode2014-05-22 13:16 8.0M 
[   ]x_end_motor_ETM.STL2014-05-09 10:11 549K 
[   ]x_end_motor_ETM.gcode2014-05-09 10:13 10M 
[   ]z_lowers_0.1.gcode2014-04-29 10:37 9.0M 

Apache/2.4.25 (Debian) Server at devel.lulzbot.com Port 80