Index of /TAZ/novelties/octopus_v18

[ICO]NameLast modifiedSizeDescription

[PARENTDIR]Parent Directory  -  
[   ]octopus_v18_yeoldebrian_highpoly_DENSE_AND_SLOW.gcode2013-12-24 17:54 1.0M 
[   ]octopus_v18_yeoldebrian_highpoly_DENSE.gcode2013-12-24 17:44 1.0M 
[   ]octopus_v18_yeoldebrian_highpoly.stl2014-01-21 17:57 115M 
[   ]octopus_v18_yeoldebrian_highpoly.gcode2013-12-24 15:50 1.0M 
[   ]octopus_v18_yeoldebrian_.1mmlayer_DefensivePerimeters.gcode2013-04-03 08:59 21M 
[   ]octopus_v18_yeoldebrian_.1mmlayer.gcode2013-04-03 03:08 2.3M 
[   ]octopus_v18_yeoldebrian_.1layer.gcode2013-04-03 03:05 214K 
[   ]octopus_v18_yeoldebrian_.05mmlayer_Hollow-OutsideFirst.gcode2013-04-03 11:47 6.2M 
[   ]octopus_v18_yeoldebrian.stl2012-01-20 20:46 4.9M 
[   ]octopus_v18_yeoldebrian-200s_50scale.gcode2013-04-02 20:56 2.1M 
[   ]octopus_v18_yeoldebrian-200s.gcode2013-03-15 23:12 5.9M 
[   ]octopus_v18_sstest-8.gcode2013-04-04 15:21 1.4M 
[   ]octopus_v18_sstest-7.gcode2013-04-04 15:12 777K 
[   ]octopus_v18_sstest-5.gcode2013-04-04 14:39 1.0M 
[   ]octopus_v18_sstest-4.gcode2013-04-04 14:32 1.0M 
[   ]octopus_v18_sstest-3.gcode2013-04-04 14:15 970K 
[   ]octo_vase.stl2014-09-20 00:19 5.6M 
[   ]octo_vase.gcode2014-09-20 00:29 12M 
[DIR]logo/2014-05-06 14:43 -  
[   ]config-octo-sstest-9.ini2013-04-04 15:45 2.8K 
[   ]config-octo-sstest-8.ini2013-04-04 15:20 2.8K 
[   ]config-octo-sstest-7.ini2013-04-04 15:11 2.8K 
[   ]config-octo-sstest-4.ini2013-04-04 14:32 2.8K 
[   ]config-octo-sstest-3.ini2013-04-04 14:15 2.8K 
[   ]config-octo-sstest-2.ini2013-04-04 13:52 2.8K 
[   ]config-octo-sstest-1.ini2013-04-04 13:10 2.8K 
[TXT]README.html2013-03-16 04:17 560  

octopus_v18_yeoldebrian-200s.gcode 8572.6774 mm of filament used in this print the print goes from 69.073000 mm to 228.923000 mm in X and is 159.850000 mm wide the print goes from 59.360000 mm to 220.630000 mm in Y and is 161.270000 mm wide the print goes from 0.000000 mm to 37.125000 mm in Z and is 37.125000 mm high Estimated duration (pessimistic): 247 layers, 2:55:32 Setting bed temperature to 85.000000 degrees Celsius. Setting hotend temperature to 230.000000 degrees Celsius. Print Started at: 17:15:17 Print ended at: 22:10:43 and took: 4:55:26